OpenBCM V1.07b12 (Linux)

Packet Radio Mailbox



 Login: GUEST


(only sysop, init.bcm)
Syntax: ERASEL(OG) [<n>]

This parameter defines if erase of mails will be logged in file
"trace/eraselog.bcm". Following options are possible:
Value Flag    Discription
  1   #L      remote erase mail received, and sender BBS is same as sender BBS
              of original mail
      #X      remote erase mail received, but sender BBS is not the same
      #K      remote erase mail send by this BBS
  2   #S      erased mails local from sysop
  4   #E      erased mails local from user
  8   #F      forwarded user mails
 16   #U      logging of unerase commands
 32   #T      erased bulletin because of transfer
 64   #W      worked WP mail as received

The parameter <n> can be calculated as amount of all all desired options.

      ERASELOG 0   ... nothing is logged
      ERASELOG 127 ... all erase commands are logged

If option "+V" is set at DIR or LIST command, erased mails are also shown.
Instead of ")" after number there is above flag shown.

 05.12.2023 19:35:49zGo back Go up